Panasonic BT-3DL2550P User Manual
25
Main Menu
(continued)
Not available in the split-screen display of the “TWO WINDOW” function or COMPARISON in 3D mode. (CROSS
HATCH is not affected.)
HATCH is not affected.)
Underlined values indicate factory defaults.
*1 This setting is turned “ON” when receiving marker control in REMOTE operation. (GPI, if set, has priority.)
*2 These settings are disabled when the GPI function (J page 53) is used to control the marker setting.
*2 These settings are disabled when the GPI function (J page 53) is used to control the marker setting.
They are also disabled in split screen mode.
*3 This setting is enabled only for HD and SD signal input in 16:9 aspect ratio mode.
*4 TYPE1 and TYPE2 area marker size depends on the “MARKER TYPE” setting (J page 26).
*4 TYPE1 and TYPE2 area marker size depends on the “MARKER TYPE” setting (J page 26).
MARKER
Sub menu
Setting
Description
MARKER
OFF
*1
ON
Turns the MARKER setting on and off.
<OFF>
MARKER disabled
<ON>
MARKER available
16:9
*2*3*4
OFF
4:3
13:9
14:9
CNSCO
VISTA
95%
93%
90%
88%
80%
USER 85%
Selects/displays the 16:9 marker type.
<OFF>
No marker display
<4:3>
4:3 marker
<13:9>
13:9 marker
<14:9>
14:9 marker
<CNSCO>CNSCO marker
<VISTA> VISTA marker
<95%>
95% area marker
<90%>
90% area marker
<80%>
80% area marker
<93%>
93.1% area marker (TYPE1)
93% area marker (TYPE2)
93% area marker (TYPE2)
<88%>
89.5% area marker (TYPE1)
88% area marker (TYPE2)
88% area marker (TYPE2)
<USER> This area marker can be varied in 1% increments in the
range between 80% to 100%. However, an 88% value for a
TYPE1 MARKER TYPE indicates an area marker whose
height is 89% of available screen height in the selected
aspect ratio.
(The factory default is 85%.)
TYPE1 MARKER TYPE indicates an area marker whose
height is 89% of available screen height in the selected
aspect ratio.
(The factory default is 85%.)
4:3
*2*4
OFF
95%
93%
90%
88%
80%
USER 85%
Selects/displays the 4:3 marker type.
<OFF> No marker display
<95%>
<95%>
95% area marker
<93%>
93% area marker
<90%>
90% area marker
<80%>
80% area marker
<88%>
89% area marker (TYPE1)
88% area marker (TYPE2)
88% area marker (TYPE2)
<USER> This area marker can be varied in 1% increments in the
range between 80% to 100%. Values of 93% and 88% for
TYPE1 MARKER TYPE indicate area markers whose height
is 93.1% and 89.5%, respectively, of available screen height
in the selected aspect ratio.
(The factory default is 85%.)
TYPE1 MARKER TYPE indicate area markers whose height
is 93.1% and 89.5%, respectively, of available screen height
in the selected aspect ratio.
(The factory default is 85%.)
BACK
*2
NORMAL
HALF
BLACK
Selects the background brightness around the marker.
<NORMAL> Normal background
<HALF>
<NORMAL> Normal background
<HALF>
50% background brightness
<BLACK>
0% background brightness (black)
CENTER
*2
OFF
ON
Displays/turns off the center marker.
<OFF>
Turns the display off
<ON>
Turns the display on
BT-3DL2550PE(VQT2U10)_E.book 25 ページ ２０１０年７月８日 木曜日 午後２時１２分