Panasonic BT-L2150E User Manual
Main Menu
(continued)
20
Underlined values indicate factory defaults.
*
1
This function is not available when PC is selected in the INPUT SELECT menu (
Jpage 21).
*
2
The following sharpness values are available and the settings for the selected input signal is displayed.
Adjustment status during selection appears at the bottom right of the screen.
1) VIDEO system input (VIDEO) (the factory defaults are SHARPNESS MODE: LOW and SHARPNESS H: 0)
2) HD for input other than VIDEO (the factory defaults are SHARPNESS MODE: HIGH and SHARPNESS H: 0).
3) SD for input other than VIDEO (the factory defaults are SHARPNESS MODE: LOW and SHARPNESS H: 0).
Adjustment status during selection appears at the bottom right of the screen.
1) VIDEO system input (VIDEO) (the factory defaults are SHARPNESS MODE: LOW and SHARPNESS H: 0)
2) HD for input other than VIDEO (the factory defaults are SHARPNESS MODE: HIGH and SHARPNESS H: 0).
3) SD for input other than VIDEO (the factory defaults are SHARPNESS MODE: LOW and SHARPNESS H: 0).
*
3
Selecting VAR1, VAR2 engages the WB adjustment mode (
J see below).
■ WB Adjustment Mode
Select VAR1 and VAR2 for COLOR TEMP. in the VIDEO CONFIG menu to make WHITE BALANCE VAR1 and
WHITE BALANCE VAR2 (WB) adjustments.
Select VAR1 and VAR2 for COLOR TEMP. in the VIDEO CONFIG menu to make WHITE BALANCE VAR1 and
WHITE BALANCE VAR2 (WB) adjustments.
Underlined values indicate factory defaults.
*
4
Selecting COLOR TEMP. and pressing [ENTER] after making a change, opens a confirmation screen. Selecting
YES and pressing [ENTER] in this screen resets selected GAIN and BIAS values to the selected color
temperature values.
YES and pressing [ENTER] in this screen resets selected GAIN and BIAS values to the selected color
temperature values.
*
5
The item display moves to the lower part of the screen during adjustment.
VIDEO CONFIG
Sub menu
Setting
Description
GAMMA
SELECT
SELECT
*
1
2.2
2.35
2.35
Selects gamma curve.
<2.2>
<2.2>
Selects the gamma 2.2 curve.
<2.35>
Selects the gamma 2.35 curve.
(A mode that approximates CRT display capability.)
(A mode that approximates CRT display capability.)
COLOR TEMP.
D93
D65
VAR1
D65
VAR1
*
3
VAR2
*
3
Selects color temperature.
<D93>
<D93>
Equivalent to a color temperature of 9,300 K
<D65>
Equivalent to a color temperature of 6,500 K
<VAR1> WB adjustment mode
<VAR2> WB adjustment mode
<VAR2> WB adjustment mode
SHARPNESS
MODE
MODE
*
1
HIGH
*
2
LOW
Selects the width of outline correction edge.
<HIGH> Thin edge
<HIGH> Thin edge
<LOW> Wide edge
SHARPNESS H
*
1
0 to 30
*
2
Sets horizontal outline correction. The item display moves to the
lower part of the screen during adjustment.
lower part of the screen during adjustment.
SD ASPECT
*
1
4:3
16:9
16:9
Sets the aspect ratio for SD signal input.
<4:3> 4:3 aspect ratio
<4:3> 4:3 aspect ratio
<16:9> 16:9 aspect ratio
Sub menu
Setting
Description
COLOR TEMP.
*
4
D93
D65
D65
Selects the color temperature that will become the basis for
adjustment.
<D93>
adjustment.
<D93>
Equivalent to a color temperature of 9,300 K
<D65>
Equivalent to a color temperature of 6,500 K
GAIN RED
*
5
0 - 1023
(Factory defaults are
color temperature
<D65> values.)
(Factory defaults are
color temperature
<D65> values.)
• These are the
adjustments made
before shipment
from the factory.
before shipment
from the factory.
Adjusts the GAIN elements for RED.
GAIN GREEN
*
5
Adjusts the GAIN elements for GREEN.
GAIN BLUE
*
5
Adjusts the GAIN elements for BLUE.
BIAS RED
*
5
-512 to 511
(Factory default: 0)
(Factory default: 0)
Adjusts the BIAS elements for RED.
BIAS GREEN
*
5
Adjusts the BIAS elements for GREEN.
BIAS BLUE
*
5
Adjusts the BIAS elements for BLUE.
RESET
Resets GAIN RED - BIAS BLUE to color temperature values
selected under COLOR TEMP.
selected under COLOR TEMP.