Planar LC12 User Manual

Title:  Product Specification: LC12 High-Bright Monitor 

Page 5 of 24 

Document Number: 023-0284-01 

 

          Revision:  A 

2.1       Weight 

Monitor weight does not exceed 5 Kgs (11 lbs). 

2.2       Mechanical Mounting Requirements 

Per Planar Mechanical Outline drawing 074-0666-01 

2.3       Monitor Electronics 

Electronic components requiring heat sinks are installed independent of the Monitor enclosure.  

That is, its sheet metal chassis is not used as a heat sink for any electronic component. 

2.4       Cooling Fan  

 

 

Cooling fans are installed to maintain appropriate internal operating temperatures when the 
Monitor is subjected to its operating environment of Section 3. Forced air convection is used to 

cool the LCD Panel (front and back). 

2.5       Vandal Glass 

The Monitor is designed to operate with a vandal glass 289 mm x212 mm x 10 mm in place. This 

vandal glass in not provided with the Monitor. 

2.6       Air Filtration 

An air filter mesh is included to prevent ingress of insects and ensure continual flow of cooling air 
within the Monitor.  The air filter mesh is externally accessible for cleaning.  

2.7       Connectors 

There are two (2) connectors supplied as an integral part of the Monitor.   

2.7.1       

Video Signal Connector 

The Monitor unit includes a chassis mounted 15-pin female mini D-Shell connector 
(AMP 748390-5 or equivalent) with socket contacts at the rear of the Monitor.  It is 

shielded for electromagnetic interference (EMI) purposes.  Refer to Section 4.1 for 

electrical connections. 

2.7.2       

DC Power Input Connector  

The DC power input connector is a chassis mounted 2-pin "MAT?N?LOK" style 

connector (AMP 1-480699-0 or equivalent) with pin contacts at the rear of the 
Monitor.  Connections are insulated to insure no accidental contact.