NEC FP955 User Manual
Quick Start
3
To attach the MultiSync
®
FP955
™
monitor to your system, follow
these instructions:
1. Turn off the power to your computer.
2. If necessary, install the display card into your system. For more information,
2. If necessary, install the display card into your system. For more information,
refer to the display card manual.
3. For the PC: Connect the 15-pin mini D-SUB of the signal cable to the
connector of the display card in your system (Figure A.1). Tighten all screws.
For the Mac: Connect the MultiSync FP955 Macintosh cable adapter (not
included) to the monitor connector on the Macintosh. Attach the 15-pin mini
D-SUB end of the signal cable to the MultiSync FP955Macintosh cable
adapter on the computer. Tighten all screws.
D-SUB end of the signal cable to the MultiSync FP955Macintosh cable
adapter on the computer. Tighten all screws.
NOTE: To obtain the MultiSync FP955 Macintosh cable adapter, call
NEC-Mitsubishi Electronics Display of America, Inc. at (800) 820-1230.
4. For download information on the Windows
®
95/98/2000 INF file for your
MultiSync monitor, refer to the References section of this User’s Manual.
NOTE: If you have any problems, please refer to the Troubleshooting section of
this User’s Manual.
Figure A.1
FP955.wpc
1/23/01, 12:13 PM
5