NEC LCD1530V User Manual

16,194,277 colors with
dithering

31.0 kHz to 60.0 kHz
56.2 Hz to 75.0 Hz

720 x 400*VGA text
640 x 480*at 60 Hz to 75 Hz
800 x 600*at 56 Hz to 75 Hz
832 x 624* at 75 Hz
1024 x 768 at 60 Hz to 75 Hz

307 mm/12.1 inches
230 mm/9.1 inches

AC 100-240 V @50/60 Hz

370 (W) x 370 (H) x 160 (D) mm

4.7 kg (10.4 lbs)

5 °C to 35 °C
30% to 80%
3,000 m
-10 °C to +60 °C
10% to 85%
12,000 m

0.46 A @ 100-120 V / 0.27 A @ 220-240 V

LCD Module

Diagonal:

Viewable Image Size:

Native Resolution (Pixel Count):

Display Colours

Analog input:

Synchronization Range

Horizontal:

Vertical:

Resolutions Supported
Resolution based on horizontal and
vertical frequencies only

Active Display

Horizontal:

Area**

Vertical:

Power Supply

Dimensions

Weight

Environmental Considerations

Operating Temperature:

Humidity:

Altitude:

Storage Temperature:

Humidity:

Altitude:

Input Signal

Video:

Sync:

Current Rating

15.1 inch
15.1 inch
1024 x 768

ANALOG 0.7 Vp-p/75 Ohms
Separate sync.TTL Level
Horizontal sync. Positive/Negative
Vertical sync. Positive/Negative

Active matrix; thin film
transistor (TFT) liquid
crystal display (LCD);
0.30 mm dot pitch; 200cd/m

2

white luminence; 200:1
contrast ratio, typical

Depends on display card
used.

Automatically
Automatically

Some systems may not
support all modes listed.

NEC-Mitsubishi Electronics
Display cites recommended
resolution at 75 Hz for
optimal display performance.

Dependent upon signal
timing used, and does not
include border area.

* Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD
module, text may appear different. This is normal and necessary for all current flat panel technologies
when displaying non-native resolutions full screen. In flat panel technologies, each dot on the screen is
actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution must be done.

Technical specifications are subject to change without

notice.