NEC LCD72XM User Manual
English
English-3
Contents
Your new NEC AccuSync LCD monitor box* should contain the following:
•
AccuSync LCD monitor with tilt base
•
DVI-D Cable (LCD92XM only)
•
Audio Cable
•
Power Cord
•
Video Signal Cable
•
User’s Manual
•
CD-ROM
•
Base Stand
•
Cable Holder
Quick Start
To attach the Base to the LCD Stand:
1. Insert the front of the LCD stand into the holes in the front of the Base (Figure S.1).
2. Next, position the locking tabs on the back side of the LCD stand with the holes on the Base. Lower the Stand in place until
locking tabs are secure (Figure S.1).
To attach the Cable Holder:
1. Insert the tabs of Cable Holder into the hole of Stand neck (Figure S.1).
NOTE:
Please confirm that the tabs are completely secure.
Figure A.1
To attach the AccuSync LCD monitor to your system, follow these instructions:
1. Turn off the power to your computer.
2. For the PC or MAC with DVI digital output: Connect the DVI-D signal cable (included with LCD92XM only) to the
connector of the display card in your system (Figure B.1). Tighten all screws.
For the PC with Analog output: Connect the 15-pin mini D-SUB signal cable to the connector of the display card in your
system (Figure A.1). Tighten all screws.
system (Figure A.1). Tighten all screws.
For the Mac: Connect the MultiSync Macintosh cable adapter (not included) to the computer. Attach the 15-pin mini
D-SUB signal cable to the MultiSync Macintosh cable adapter (Figure A.2). Tighten all screws.
D-SUB signal cable to the MultiSync Macintosh cable adapter (Figure A.2). Tighten all screws.
NOTE:
Some Macintosh systems do not require a Macintosh cable adapter.
User’s Manual
Audio Cable
Power Cord
Video Signal Cable
Base Stand
AccuSync LCD monitor
(base stand not connected)
Figure S.1
Base
Locking Tabs
Stand
Figure A.2
Macintosh Cable
Adapter (not included)
Adapter (not included)
CD-ROM
Cable Holder
Cable Holder
DVI-D Cable
(LCD92XM only)
*
Remember to save your original box and packing material to transport or ship the monitor.