NEC R 37 Xtra User Manual

79644641

POWER

ON

RGB 2

RGB 1

VIDEO 2

VIDEO 1

POSITION / CONTROL

PROCEED

EXIT

SCAN

NORMAL

SIDE PIN

HEIGHT

WIDTH

BRIGHT CONTRAST MUTE

NORMAL

VOLUME

OFF

DEGAUSS

MULTIMEDIA MONITOR
RD-346E

0

A
D

F

E

7

8

B

C

9

B

Adjusts the overall image and screen brightness.

Press and hold   for a brighter picture.

Press and hold   for a darker picture.

C

Adjusts the image brightness in relation to the background.

Press and hold   for higher contrast.

Press and hold   for lower contrast.

NOTE: The VISUAL CONTROL storing operation is effective only for the

input currently used (VIDEO1, VIDEO 2, RGB 1 or RGB 2).

D

This key resets the visual control settings and recalls the factory preset data.

NOTE: The brightness and contrast adjustment level are factory preset at

the optimum position.

E

Press to cancel sound ; press again to restore sound.

NOTE: The other ways to restore sound are to press POWER OFF, then

ON or to press VOLUME keys on the remote control unit.

F

Adjusts the volume.

Press and hold   to increase sound.

Press and hold   to decrease sound.

7

Adjusts the horizontal size of the image.

8

Adjusts the vertical size of the image.

9

Adjusts the curvature of the edges of the left and right side of the display

image either inward or outward. The image should be adjusted to attain a

straight line on the left and right sides.

0

Each time this key is pressed, the picture size switches from OVER SCAN

for large size to UNDER SCAN for small size and vice versa. Normally select

OVER SCAN for video display and UNDER SCAN for RGB display.

A

This key resets the raster adjustment settings of user changeable memory

and recalls the factory preset data.