miro Displays P17F86i User Manual

6

7

The digital control panel is located at the bottom of your color monitor.
If you are not satisfied with the factory settings, use these controls to
program those you prefer in each resolution. Then, these adjusted set-
tings are kept in memory even if you change resolution or turn off the
monitor.

Power ON/OFF button

Use this button to turn the monitor on and off.

Power Indicator

This light glows green during normal operation and glows 
orange during power off. Glows orange and flash during 
power saving mode.

Menu button

To push menu button turns on the menu, and it activates the 
items you highlight.

Select button

Use this button to move up and down the OSD selection menu
and adjust the attribute of the monitor while in OSD mode.

The OSD menu activates automatically when you press the 
Menu button on the front of the monitor. The OSD remains centered on
the screen while you make your adjustments. Use either the

or       select button to move the highlight to your selection. Pressing

menu button the submenu will appear nearby main menu. The status bar
indicates in which direction, from the factory preset, which adjustments
are being made. Use the       or       select button to adjust the control.

When you have finished making adjustments, press the menu button to
save settings and exit back to main menu.

Adjusts the black level of the display.

Adjusts the luminosity level of the display

Select this control to center the image horizontally on the screen.

Select this control to center the image vertically on the screen.

Select this control to expand or decrease the image width to 
horizontally fill the screen.

Select this control to adjust the image height to vertically fill the screen.

Rotates the image until the sides of the image are parallel to the edge
of the bezel.

Menu