Memorex MT1701 User Manual
TV OPERATION
24
Adjust the volume level by pressing the VOLUME Up ❶ or
Down ❷ button. The volume level will be indicated on the
screen by green bands and a green numerical display
between 0 and 24 where 0 is the lowest setting and 24 is
the loudest.
2
1
3
For proper operation, before selecting channels, they
must be set into the TV’s program memory, see page 22.
must be set into the TV’s program memory, see page 22.
Press and release the CHANNEL Up 1 or Down 2 button.
The TV automatically stops at the next channel set into
memory. This will not operate if channels are not set into
memory.
Direct Program Selection buttons (0 - 9)
Use these buttons to select a channel. The channel number
will appear at the top right corner of the screen.
• Select a channel using the Direct Channel Selection
buttons 3 and the channel will change in approximately
two seconds.
2
3
1
4
Select the TV or CATV option as described on page 17.
2
Press the POWER button to turn on the TV; the POWER
indicator will light green.
1
OPTIONS
TV:
If using a
VHF/UHF
antenna.
CATV:
If using Cable
TV.
NOTES:
• When TV/CATV option is set to TV, only channels up
to 69 can be selected. When set to CATV, channels
up to 125 can be selected.
• If an invalid channel is selected, the display will revert
to the original channel.
FAQs:
Why do I only receive 69 channels, when my cable goes much higher?
TV/CATV option must be set to CATV when using cable, see page 17.
Why are some channels scrambled?
You must subscribe to these channels through your cable company.