Neuro Logic Systems RFT-17 User Manual

 

 

 

The LCD monitor will auto-adjust at start-up. Although not required, you can make numerous adjustments to your 
monitor using the on-screen menu. To access the OSD (On-Screen Display) menu Press the MENU button 
located at the top of the LCD monitor. 
 
The table below describes various function controls of the LCD Monitor. The control buttons can be accessed 
from the top of the LCD monitor once it has been raised in to the operating position. The OSD menu will 
disappear after a pre-set time of no use. 
 
 

Menu button 

Displays the On-Screen 

Display (OSD) 

Selects the next page of the 

menu 

Brightness/minus 

Decrease display brightness 

Decreases or changes value 

of the adjustment item 

Brightness/plus 

Increase display brightness 

Increases or changes value of 

the adjustment item 

Auto/Select 

Activates the Auto Adjust 

function to obtain an optimum 

image 

Selects a menu item 

Power switch 

Turn power on and off 

manually 

Turn power on and off 

manually 

  

Page 9 of 14 

(on some models the menu panel may be located on the back of the LCD)