Samsung 700TSn User Manual
1. Click on touch
Mouse single click event happens immediately at the point when the finger contact the touchscreen, not for dragging objects. In
this mode the touchscreen responds fastest, it's usually used for big button applications.
this mode the touchscreen responds fastest, it's usually used for big button applications.
2. Click on Release
Mouse click event happens at the point where the finger leaves touchscreen; in this mode the finger moving position is followed
by eyes and precisely controlled, therefore it's suitable for small buttons or hyperlink of web pages, such as POS, WEB
applications.
by eyes and precisely controlled, therefore it's suitable for small buttons or hyperlink of web pages, such as POS, WEB
applications.
3. Mouse Emulation
This is the default mode. Full emulation of mouse functions including left-button click, moving, lifting, and dragging; if writing,
drawing, or dragging map are required, this mode is well suitable to the above application.
drawing, or dragging map are required, this mode is well suitable to the above application.
4. Enable Touch
Enable(default)/disable touchscreen;
5. Hide Cursor
Hide cursor without closedown of the mouse function; because Mouse cursor is not used in some applications but always is
applied to such filed as big button, playing animation, or children education in "Click On Touch" mode.
applied to such filed as big button, playing animation, or children education in "Click On Touch" mode.
6. Send Right Click
To enable right-click function(default). Click and press on any area on the screen for two seconds, the right-click pop-up menu
will show up. Right-click is only available in Mouse Emulation mode. User may adjust the number of “delay” in “Right Click
Settings” if finding the pop-up time is either fast or slow. Notice: the higher the value, the slower the pop-up time. "Delay" unit is
"millisecond". The "area" is used for adjusting the jitter-range of the touch surface within limit of error (unit: pixel). The higher the
value, the wider the jitter-range. Right Click menu will pop up so long as the finger contacts the screen for a while within the
range.
will show up. Right-click is only available in Mouse Emulation mode. User may adjust the number of “delay” in “Right Click
Settings” if finding the pop-up time is either fast or slow. Notice: the higher the value, the slower the pop-up time. "Delay" unit is
"millisecond". The "area" is used for adjusting the jitter-range of the touch surface within limit of error (unit: pixel). The higher the
value, the wider the jitter-range. Right Click menu will pop up so long as the finger contacts the screen for a while within the
range.
7. Enable Double Click
Same as the function of Mouse Double Click. Double click on the same setting area of objects in a short time. The "Double Click
Settings" property can be set so as to get the best performance on Double Click. "Speed" unit is "millisecond". The higher the
value, the longer the effective time interval between the double clicks raising the function of Double Click. "Area" is used for
either amplifying or reducing the Double Click area. The higher the value (unit: pixel), the more sensitive the response of Double
Click. Double-click should be utilized in the applications such as "Click on touch", "Click on Release", "Mouse Emulation".
Settings" property can be set so as to get the best performance on Double Click. "Speed" unit is "millisecond". The higher the
value, the longer the effective time interval between the double clicks raising the function of Double Click. "Area" is used for
either amplifying or reducing the Double Click area. The higher the value (unit: pixel), the more sensitive the response of Double
Click. Double-click should be utilized in the applications such as "Click on touch", "Click on Release", "Mouse Emulation".
8. Enable Delay Touch
After this function is enabled, high speed touch or scratch on the screen becomes ineffective. It is the very effective for touch to
maintain steadily for a time in specified area. This function is for banking and industrial control applications, such as ATM,
Switches of industrial equipment and used in both Click on touch and Click on Release modes. The "Delay Touch Setting"
properties can be set selectively. The higher the value (unit:millisecond), the longer the touch-delay time; "area" is utilized to
regulate the effective area in which finger maintains on the touch plane. The higher the value (unit: pixel), the wider the effective
area.
maintain steadily for a time in specified area. This function is for banking and industrial control applications, such as ATM,
Switches of industrial equipment and used in both Click on touch and Click on Release modes. The "Delay Touch Setting"
properties can be set selectively. The higher the value (unit:millisecond), the longer the touch-delay time; "area" is utilized to
regulate the effective area in which finger maintains on the touch plane. The higher the value (unit: pixel), the wider the effective
area.