Barco 1218 User Manual

MFCD 1218 User's Guide

14

**To unlock the Controls, proceed as follows:

1

Press the Power key to switch off the display

2

With one hand, press and hold the <+> and
the <-> key at the same time.
With the other hand, press the Power key
shortly to switch the display on again.

3

Keep holding the <+> and the <-> key for
about 3 seconds.

4

At last, release the <+> and the <-> key.
Now, by pressing the Menu key, the OSD
menu will appear.

When you select a video input source, the Main
menu changes into the Video Menu.

To adjust the overall image and
background brightness level.

To adjust the image brightness in
relation to the background
(the background is unchanged).

To adjust the color's saturation of a
parameter, such as light and shade
control of preference display colors.

To adjust the color's hue of a parameter,
such as vivid colors control of
preference display colors.

To select Analog (A1),
DVI-D (D), or S-Video (SV) input
source.

When locked, the OSD menu will not
appear when pressing the Menu key.

To restore the previous setting.

To save the adjustments and quit the
OSD menu.

The bottom line of the OSD shows the input type,
current resolution of the monitor and status of
vertical sync. If it shows user mode, please refer
to the monitor Preset mode.