Multi-Tech Systems MTD-EV3 User Manual
BASIC OPERATIONS
Note:
Signal strength of 10 or higher is needed for successful packet data sessions.
Example
A example response to AT+CSQ:
+CSQ: 15,1
Checking Network Registration
Before establishing a packet data connection, verify the is device registered on the network. To do this enter the
network registration report read command:
network registration report read command:
AT+CREG?
If the device returns:
+CREG: 0,1
The device is registered.
If the device returns:
+CREG: 0,2
The device is in a network searching state.
Reading, Writing, and Deleting Messages
Reading Text Messages
To read a text message in text mode:
1.
Put the device in text mode.
Enter: AT+CMGF=1
Enter: AT+CMGF=1
2.
Read message.
Enter: AT+CMGR=1
Enter: AT+CMGR=1
Example response:
+CMGR: "REC UNREAD","+16155554562z`z","","13/09/05,13:39:40-20"
How are you?
OK
How are you?
OK
Sending Text Messages
To send a text message in text mode:
1.
Put the device in text mode.
Enter:
AT+CMGF=1
The device responds.
OK
Enter:
AT+CMGF=1
The device responds.
OK
2.
Enter the recipient's number and your message.
16
QuickCarrier
TM
USB-D EV-DO MTD-EV3 User Guide