Panasonic AJ-HRW10G User Manual

19

When switching between RAID1 and JBOD or 
otherwise changing the RAID level, delete the logical 
drive which is currently set.

When the RAID level is re-set, the data on the HDD 
will be deleted so take care before proceeding.

A

B

A   HDD-related information

    The button will flash green when selected.

     Display the RAID board connection location and 

RAID level.

     Displays RAID control number.

     Displays RAID disk capacity.

     Displays operating conditions.

B  CLOSE button

Return to the main screen.

The HDD is indicated as a theoretical device. Select 
the device you want to delete and press OK button, a 
confirming message will display.

Press OK button and the selected theoretical device 
will be deleted from the theoretical device list.
After the finished message is displayed, Press the OK button.

Press NEXT button after setting, the confirming screen 
will display. Please press OK button.

(In the RAID1 mode)

(In the JBOD mode)

When HDDs of different capacities have been set as 
RAID1, the smaller size of the two installed HDDs is 
displayed in Logical Drive Size.

Please press OK button in the further confirming 
screen.

When the OK button on the reconfirmation screen is 
pressed, all the data on the HDD is deleted.  Make 
sure that you do not need the data before pressing this 
button.

Press the OK button when a message is displayed 
after RAID initialization. The unit can now be used as a 
RAID drive.