Panasonic AJ-HRW10G User Manual

20

When data rebuilding is necessary or during 
the rebuilding process, either “Need Rebuild” or 
“Rebuilding” is displayed under the HDD icon on the 
main screen.

Press the RAID button in this status, and select 
the [REBUILD] tab.  The screen shown below now 
appears.

A

B

C

D

(When rebuilding is in progress)

A   HDD-related information

    Display name of logical drive.

     Display Rebuild Status.

If “Need Rebuild” is displayed, rebuild is required.
If “Rebuilding” is displayed, rebuild in is progress.

     Display rebuild completion ratio (%). (Rebuild is 

complete when this ratio reaches 100 %.)

B   START button

Start the rebuilding process.
When “Need Rebuild” was displayed, this button is 
shown with black text.

C   STOP button

Stop the rebuilding.

D  CLOSE button

Return to the main screen.

When the STOP button has been pressed, a 
confirmation message such as the one shown 
below is displayed.

To stop the rebuilding, press the OK button; to 
cancel the stopping, press the CANCEL button.

•  If an HDD has been replaced due to trouble while 

setting RAID1, rebuilding from a trouble-free HDD 
must be undertaken for mirroring purposes.

•  When the automatic rebuilding can not work normally 

as usual, please follow the indication to rebuild in 
this screen. Automatic rebuilding is not initiated if 
[Disable] is set for the Automatic Rebuilding Status 
on the RAID settings screen.

•  The status and progress are indicated during the 

rebuilding process. Note that it takes about 2 hours 
to rebuild a 500 GB HDD. Do not unplug the external 
DC power supply during this time.