Panasonic AJ-HRW10G User Manual

29

G

H

A

B

C

D

E

F

A  MODE

The names of the modes corresponding to the 
items are displayed here.
•  Alphanumeric characters can be inputted when 

[Character String Mode] is displayed.

•  Only numbers can be inputted when [Number 

Mode] is displayed.

B  Input column

Inputted alphanumeric characters are displayed.

C   ESC button

This restores the original Meta Data screen.

D  CAPS LOCK button

This switches the letters between the upper case 
and lower case.

E  BACKSPACE button

This deletes the character in front of the character 
where the cursor is located.

F  ENTER button

 This enters the currently displayed data.

G  ← button

This moves the cursor in the input field toward the 
left.

H   → button

This moves the cursor in the input field toward the 
right.

Input instructions are as follows. 
1.  To enter letters, press keys on the on-screen 

keyboard. 

2. To confirm input, press the ENTER button.

When the Device Selection Button is pressed on the 
EXPLORE screen, the devices to be displayed on the 
thumbnail screen are selected.

A

B

C

D

E

F

A  ALL SLOTS button

This displays all the slots.

B  ALL HDDS button

This displays all the HDD.
This display will not appear when in RAID mode.

C   HDD1 button / HDD2 button / RAID1 button

HDD will be selected for each when in HDD mode.
This button will be displayed as [RAID1] when in 
RAID mode.

D  SLOT1 button ~ SLOT5 button

These are used to select and display the slots.

E  OK button

Thumbnails are displayed in the case of P2 cards.
Folders are displayed in the case of the HDDs.

F  CANCEL button

Close this screen and return to the EXPLORE 
screen.

Select devices as follows. 
● P2 cards
   

Select the P2 card slot you require (either the ALL 
SLOTS or individual SLOT (1-5) buttons), and then 
press the OK button. 

● HDDs
   

Select the HDD you require (from among the ALL 
HDDS, HDD1 or HDD2, or RAID1 button), and then 
press the OK button.