Panasonic AJ-HRW10G User Manual
44
Creating PASS registration data
Register as a PASS (P2 Asset Support System)
member to use P2 Status Logger, an inspection utility
for P2 devices. With this utility, you can check the
software version of registered devices, update the
software, and manage usage records.
Prepare the latest data for checking and management
as follows.
member to use P2 Status Logger, an inspection utility
for P2 devices. With this utility, you can check the
software version of registered devices, update the
software, and manage usage records.
Prepare the latest data for checking and management
as follows.
1
Connect the unit to a network where there is
a computer with P2 Status Logger installed.
2
Press the LOG button at the bottom right of
the Maintenance tab screen on the SETTING
screen.
the Maintenance tab screen on the SETTING
screen.
The latest registration data is created automatically.
2
3
On the computer mentioned in step 1, access the
registration folder on the unit (\P2Writer PASS) over
the network and acquire the registration data.
You can now review a variety of information about the
unit and manage records.
registration folder on the unit (\P2Writer PASS) over
the network and acquire the registration data.
You can now review a variety of information about the
unit and manage records.
3
After registration data is acquired, press the
CLOSE button to return to the main screen.
Selecting a workgroup
You can choose either MSHOME or WORKGROUP as
the name of the workgroup to be used by the network.
the name of the workgroup to be used by the network.
Maintenance (continued)