ONKYO BR925 User Manual

65

With the play timer, you can automatically turn on the 
CD/HDD receiver, start playback, and turn off the CD/
HDD receiver at a specified time. This timer is conve-
nient to use as a morning alarm.

Before setting the timer:
• You must set the clock before you can set the timers 

(page 62).

• Before setting a timer to turn on the radio, you must 

preset the station you want to use (see pages 34 and 
35

Notes:
• When four timers have already been programmed, cancel 

one of the timers already set, and then set a new one.

• Some operation cannot be done about one minute before 

the On time of the timer.

See page 67 for canceling, changing, and deleting the 
play timer.

Select a timer number.
Use the Up and Down [

q]/[w] buttons 

to select Timer1, 2, 3, or 4 and then 
press [ENTER]. The Timer indicator 
lights up and the selected timer number 
flashes on the display.

Set the status of the timer.
Use the Up and Down [

q]/[w] buttons 

to select “On”, and then press 
[ENTER].

Set the type of the timer.
Use the Up and Down [

q]/[w] buttons 

to select “Play”, and then press 
[ENTER].

Select the source.
Use the Up and Down [

q]/[w] buttons 

to select the source, and then press 
[ENTER].
You can select the following sources:
HDD, CD, USB, FM, AM, LINE, 
TAPE, DOCK, or DIGITAL
Select a preset for FM or AM.

Timer 1

  

:Off

Timer  Mode

Set the day and time.
Use the Up and Down [

q]/[w] buttons 

to select “Once” or”Every”, and then 
press [ENTER].
Select “Once” for on-off operation. 
Select “Every” to perform the same 
operation every week. Use the Up and 
Down [

q]/[w] buttons to set the day 

and then press [ENTER].
If you selected “Once”:
Use the Up and Down [

q]/[w] buttons 

to select the day, and then press 
[ENTER].

If you selected “Every”:
Use the Up and Down [

q]/[w] buttons 

to select the day, “Everyday”, or “Days 
Set”, and then press [ENTER].
You can select the following:

If you selected “Days Set”, use the Up 
and Down [

q]/[w] buttons to select the 

first day, and then press [ENTER]. Use 
the Up and Down [

q]/[w] buttons to 

select the last day, and then press 
[ENTER]. You can select only consec-
utive days.

Set the On time and Off time.
Use the Up and Down [

q]/[w] buttons 

to select the time, and then press 
[ENTER]. You can also use the number 
buttons.

Use the Up and Down [q]/[w] but-
tons to specify the CD/HDD 
receiver’s volume level, and then 
press [ENTER].
If you selected “Last”, the volume is set 
at the same level as the last playback. If 
you selected “Mute”, the output is 
muted. You can also set the volume 
from “01” through “41” to “Max”.

Note:
Be sure to set the CD/HDD receiver to 
Standby, otherwise the timed operation 
will not work.

SUN

TUE

MON

Days Set

Everyday

WED

THU

SAT

FRI