LaCie 2big triple User Manual
LaCie 2big Triple
User Manual
page
Setup
2.2. Turning the Drive On
The power supply kit is composed of two cables: one
cable (
A
) connects to the LaCie drive; and the other
cable (
B
) connects to a power outlet, such as a wall out-
let or a surge protector.
Connect Cable
A
to your LaCie Drive.
Connect Cable
B
to the power supply brick (
C
).
Connect Cable
B
to a surge protector or wall outlet.
Turn on the drive by moving the power switch on the back of the drive to the “On” position (
D
). During drive initial-
ization, the front led blinks blue and red. The 2big Triple is ready to use when the LEDs are solid blue. The volumes
will appear in My Computer (Windows) or on the desktop (Mac).
TeChNICAl NOTe:
When the power switch is in the AUTO position, the 2big Triple turns off and on with your
computer.
CAUTION:
Only use the AC adapter supplied with your specific LaCie drive. Do not use a power supply from another
LaCie drive or another manufacturer. Using any other power cable or power supply may cause damage to the device and
void your warranty. Always remove the AC adapter before transporting your LaCie drive. Failure to remove the adapter
may result in damage to your drive and will void your warranty.
TeChNICAl NOTe:
You may use your LaCie drive when in a foreign country thanks to its 100-240 Volt power supply.
To be able to use this feature, you may need to purchase an appropriate adapter or cord. LaCie accepts no responsibility for
any damage to the drive resulting from the use of an inappropriate adapter. Using an adapter other than one authorized
by LaCie will void your warranty.
1.
2.
3.
4.
2.
3.
4.
off auto on
C
Fig. 2.2
D