Kingston Technology 4000 User Manual
Document No. 48000127-001.A04
DataTraveler
®
4000
Page 4 of 27
Setup (Windows Environment)
1. Insert the DT4000 into an available USB port on
your notebook or desktop and wait for Windows
to detect it.
to detect it.
• Windows XP users will receive a ‘Found New
Hardware’ notification as seen in
Figure 2.1
.
• Windows Vista/7 users will receive a device
driver notification as seen in
Figure 2.2
.
Once the new hardware detection is complete,
Windows will prompt you to begin the initialization
process.
• Windows
XP users can skip step 2 and go to
page 5 – Device Initialization.
• Windows Vista/7 users will see an AutoPlay
window similar to the one in
Figure 2.3
.
2. Select the option ‘
Run DT4000_Launcher.exe
’.
If Windows does not AutoPlay, you can browse to
the CD-ROM partition (
the CD-ROM partition (
Figure 2.4
) and manually
execute the DT4000_Launcher program. This will
also start the initialization process.
also start the initialization process.
Figure 2.4 – DT4000 Contents
Figure 2.1 – Found New Hardware
(Windows XP)
Figure 2.2 – Device Driver Installation
(Windows Vista/7)
Figure 2.3 – AutoPlay Window
(Windows Vista/7)
(
Note: Menu options in the AutoPlay
window may vary depending on what
programs are currently installed on
your computer. AutoRun will start the
initialization process automatically.
programs are currently installed on
your computer. AutoRun will start the
initialization process automatically.
)