Rocketfish RF-HD3035 User Manual

RF-HD3035

Congratulations on the purchase of your new 
Rocketfish RF-HD3035 external hard drive 
enclosure kit.
The USB 3.0 Rocketfish 3.5" SATA hard drive 
enclosure lets you install a high-speed SATA hard 
drive and connect it to a computer via a USB 3.0 
port. The enclosure has a built-in USB 2.0 hub and 
a memory card reader.
SuperSpeed USB 3.0 transfers data at 5 gigabits 
per second. That's up to 10 times faster than USB 
2.0.
The performance may vary, based on your system 
configuration.

• This device is to be used in temperatures of 

41~95°F (5~35°C). Temperatures exceeding 
these limits may damage your hard drive or the 
enclosure. Avoid heat sources or direct 
sunlight.

• This device can be stored in a humidity range 

of between 10% and 90%, and can be operated 
in a humidity range of between 5% and 80%.

• Do not connect the device to your computer 

without taking precautions to avoid 
electrostatic discharge or short circuits, which 
could damage the device or your computer.

• Do not place this device close to a source of 

strong magnetic fields (such as a computer 
screen, TV, radio, or speaker). Strong magnetic 
fields can affect the reliability of data transfer 
to and from the device.

• Do not place anything heavy on top of the 

device.

• Use only the accessories provided in the 

accessory package.

• Before you install or use the device, read the 

user manual and assemble the enclosure 
carefully.

• To prevent short circuits, do not leave any 

metal objects inside the enclosure when 
installing the hard drive.

• To prevent short circuits, do not use the device 

close to water, rain, or high humidity.

• Multi-function storage solution for your 

computer.

• Supports up to 2 TB 3.5" SATA interface hard 

drive.

• Provides a two-slot USB 3.0 card reader that 

supports SDXC, SDHC, SD, MMC, MS, MS PRO, 
xD, Compact Flash (UDMA, Type I / II), and IBM 
Microdrive.

• Provides two external USB 3.0 downstream 

ports.

• Can stand up or lie down while operating.

• One-button backup to easily backup, restore, 

and synchronize data between your Windows 
PC and the enclosure. 

• Has one power-on LED, with backup active 

indicator.

• Metal design facilitates rapid heat dissipation. 

• Supports Plug-and-Play and is hot-swappable.

• USB 3.0 3.5" SATA hard drive enclosure

• USB 3.0 A-B cable

• AC power adapter

• Utility  CD  (User Guide and software)

• Quick  setup  guide

• Stand

• Accessories 

• Plastic  brackets  (2)

• Screws and screwdriver 

• Rubber pads (4)

• One formatted 3.5" SATA hard drive.

• PC or Macintosh computer with an available 

USB 3.0 port. (You can connect to a USB 2.0 
port, but it will only run at USB 2.0 speeds).

This symbol indicates that dangerous 
voltage constituting a risk of electric 
shock is present within your hard drive 
enclosure.

This symbol indicates that there are 
important operating and maintenance 
instructions in the literature 
accompanying your hard drive 
enclosure.

10-1087_RF-HD3035_MAN_ENG_V1.fm  Page 3  Friday, October 29, 2010  1:25 PM