Seagate ST4000DM001 User Manual
12
Desktop HDD SATA Product Manual, Rev. A
Drive Specifications
*All specifications above are based on native configurations.
** One GB equals one billion bytes and 1TB equals one trillion bytes when referring to hard drive capacity. Accessible capacity may vary depending
on operating environment and formatting.
*** During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power
to operational levels.
Voltage tolerance (including noise)
5V: ±5%
12V: ±10%
12V: ±10%
5V: ±5%
12V: ±10%
12V: ±10%
Ambient temperature
0° to 60°C (operating)
–40° to 70°C (non-operating)
–40° to 70°C (non-operating)
0° to 60°C (operating)
–40° to 70°C (non-operating)
–40° to 70°C (non-operating)
Temperature gradient
20°C per hour max (operating)
30°C per hour max (nonoperating)
30°C per hour max (nonoperating)
20°C per hour max (operating)
30°C per hour max (nonoperating)
30°C per hour max (nonoperating)
Relative humidity
5% to 90% (operating)
5% to 95% (nonoperating)
5% to 95% (nonoperating)
5% to 90% (operating)
5% to 95% (nonoperating)
5% to 95% (nonoperating)
Relative humidity gradient (max)
30% per hour
30% per hour
Wet bulb temperature (max)
30.0°C max (operating)
40.0°C max (nonoperating)
40.0°C max (nonoperating)
30.0°C max (operating)
40.0°C max (nonoperating)
40.0°C max (nonoperating)
Altitude, operating
–61m to 3048m
(–200 ft to 10,000 ft)
(–200 ft to 10,000 ft)
–61m to 3048m
(–200 ft to 10,000 ft)
(–200 ft to 10,000 ft)
Altitude, non-operating
(below mean sea level, max)
(below mean sea level, max)
–304m to12,192m
(–200ft to 40,000+ ft)
(–200ft to 40,000+ ft)
–304m to 12,192m
(–200ft to 40,000+ ft)
(–200ft to 40,000+ ft)
Operational shock (max)
80 Gs at 10ms
80 Gs at 10ms
Non-operational shock (max)
300 Gs at 2ms
300 Gs at 2ms
Vibration, operating
2Hz to 22Hz: 0.25 Gs, Limited displacement
22Hz to 350Hz: 0.50 Gs
350Hz to 500Hz: 0.25 Gs
22Hz to 350Hz: 0.50 Gs
350Hz to 500Hz: 0.25 Gs
2Hz to 22Hz: 0.25 Gs, Limited displacement
22Hz to 350Hz: 0.50 Gs
350Hz to 500Hz: 0.25 Gs
22Hz to 350Hz: 0.50 Gs
350Hz to 500Hz: 0.25 Gs
Vibration, non-operating
5Hz to 22Hz: 3.0 Gs
22Hz to 350Hz: 3.0 Gs
350Hz to 500Hz: 3.0 Gs
22Hz to 350Hz: 3.0 Gs
350Hz to 500Hz: 3.0 Gs
5Hz to 22Hz: 3.0 Gs
22Hz to 350Hz: 3.0 Gs
350Hz to 500Hz: 3.0 Gs
22Hz to 350Hz: 3.0 Gs
350Hz to 500Hz: 3.0 Gs
Drive acoustics, sound power
Idle***
2.3 bels (typical)
2.5 bels (max)
2.5 bels (max)
2.3 bels (typical)
2.5 bels (max)
2.5 bels (max)
Seek
2.8 bels (typical)
3.0 bels (max)
3.0 bels (max)
2.8 bels (typical)
3.0 bels (max)
3.0 bels (max)
Non-recoverable read errors
1 per 10
14
bits read
1 per 10
14
bits read
Rated workload
Average rate of <55TB/year. The MTBF specification for the drive assumes the
I/O workload does not exceed the average annualized workload rate limit of 55TB/year.
Workloads exceeding the annualized rate may degrade the drive MTBF and impact product
reliability. The average annualized workload rate limit is in units of TB per year, or TB per 8760
power-on hours. Workload rate limit = TB transferred × (8760/recorded power-on hours).
I/O workload does not exceed the average annualized workload rate limit of 55TB/year.
Workloads exceeding the annualized rate may degrade the drive MTBF and impact product
reliability. The average annualized workload rate limit is in units of TB per year, or TB per 8760
power-on hours. Workload rate limit = TB transferred × (8760/recorded power-on hours).
Warranty
To determine the warranty for a specific drive, use a web browser to access the following web
page:
page:
From this page, click on the “Verify Your Warranty” link. You will be asked to provide the drive
serial number, model number (or part number) and country of purchase. The system will display
the warranty information for your drive.
serial number, model number (or part number) and country of purchase. The system will display
the warranty information for your drive.
Load/unload cycles (25°C, 50% rel.
humidity)
humidity)
300,000 at 25°C, 50% rel. humidity
300,000 at 25°C, 50% rel. humidity
Supports hotplug operation per the
Serial ATA Revision 3.0 specification
Serial ATA Revision 3.0 specification
Yes
Yes
Table 1 Drive specifications summary for 5TB and 4TB
Drive Specification*
ST5000DM000
ST4000DM001