Panasonic KX-TG6511 KX-TG6511NLB User Manual
Product codes
KX-TG6511NLB
Programming
31
For assistance, please visit http://www.panasonic.com/help
Block calls without phone number
You can reject a call without phone
number including “Out of area”,
“Private caller”, or “Long
distance
number including “Out of area”,
“Private caller”, or “Long
distance
”.
1
{
MENU} i {#}{2}{4}{0}
2
{V}
/{^}: Select the desired setting.
i {SAVE} i {OFF}
Viewing/editing/erasing call block
numbers
1
{
MENU} i {#}{2}{1}{7}
2
{V}
/{^}: Select the desired entry.
L
To exit, press {OFF}.
3
To edit a number:
{
{
EDIT} i Edit the phone number.
i {SAVE} i {OFF}
To erase a number:
{
To erase a number:
{
ERASE} i {V}/{^}: “Yes” i
{
SELECT} i {OFF}
Note:
L
When editing, press the desired dial
key to add, {CLEAR} to erase.
key to add, {CLEAR} to erase.
L
When viewing, “Block w/o num” is
displayed if the block calls without
phone number feature is turned on. To
turn the feature off: {ERASE} i {V}
i {SAVE} i {OFF}
displayed if the block calls without
phone number feature is turned on. To
turn the feature off: {ERASE} i {V}
i {SAVE} i {OFF}
Registering a unit
Operating additional units
Additional handsets
Up to 6 handsets can be registered to
the base unit.
the base unit.
Important:
L
See page 6 for information on the
available model.
available model.
Registering a handset to the
base unit
base unit
The supplied handset and base unit are
pre-registered. If for some reason the
handset is not registered to the base
unit, re-register the handset.
pre-registered. If for some reason the
handset is not registered to the base
unit, re-register the handset.
1
Handset:
{
{
MENU} i {#}{1}{3}{0}
2
Base unit:
■ KX-TG6511 series: page 3
■ KX-TG6511 series: page 3
Press and hold {LOCATOR} for
about 5 seconds. (No registration
tone)
about 5 seconds. (No registration
tone)
■ KX-TG6521/KX-TG6531/
KX-TG6541 series: page 3
Press and hold {LOCATOR} for
about 5 seconds until the
registration tone sounds.
Press and hold {LOCATOR} for
about 5 seconds until the
registration tone sounds.
L
If all registered handsets start
ringing, press the same button to
stop. Then repeat this step.
ringing, press the same button to
stop. Then repeat this step.
L
The next step must be completed
within 90 seconds.
within 90 seconds.
3
Handset:
Press {OK}, then wait until a long
beep sounds.
Press {OK}, then wait until a long
beep sounds.
Note:
L
While registering, “Base in
registering
registering
” is displayed on all
registered handsets.
L
When you purchase an additional
handset, refer to the additional
handset’s installation manual for
registration.
handset, refer to the additional
handset’s installation manual for
registration.
TG6511(e).book Page 31 Wednesday, April 28, 2010 4:35 PM