Maxtor 10K III User Manual
SCSI Description
5-88
Maxtor Atlas 10K III
<7
"%% (*
2<13
The PERSISTENT RESERVATION IN command is a 10-byte command used to
obtain information about persistent reservations and reservations that are active within
a device server. It is used in conjunction with the PERSISTENT RESERVATION
OUT command.
Note that a if device that has RESERVE (10), RESERVE (6), extent reservations, or
SCSI Media Changer (SMC) element reservations active receives a PERSISTENT
RESERVATION IN command, the PERSISTENT RESERVATION IN
command is rejected with a RESERVATION CONFLICT status reported.
Table 5-108 illustrates the format of the PERSISTENT RESERVATION IN
command. Table 5-109 explains the data fields of the command.
obtain information about persistent reservations and reservations that are active within
a device server. It is used in conjunction with the PERSISTENT RESERVATION
OUT command.
Note that a if device that has RESERVE (10), RESERVE (6), extent reservations, or
SCSI Media Changer (SMC) element reservations active receives a PERSISTENT
RESERVATION IN command, the PERSISTENT RESERVATION IN
command is rejected with a RESERVATION CONFLICT status reported.
Table 5-108 illustrates the format of the PERSISTENT RESERVATION IN
command. Table 5-109 explains the data fields of the command.
Table 5-108
PERSISTENT RESERVATION IN Command Descriptor Block-Data Format
*
5
>
'
%
$
0
Operation Code (5Eh)
1
Reserved
Service Action
2 - 6
Reserved
7 – 8
(MSB)
Allocation Length
(LSB)
9
Control