Maxtor 10K III User Manual
SCSI Description
5-16
Maxtor Atlas 10K III
<:
'A
"#%+
"0
"%% (*+
Five different forms of the FORMAT UNIT command are supported through
different combinations of the Format Data bit, Complete List bit, and the information
in the Defect List Length field. (Refer to FORMAT UNIT Defect Header List for a
description of the Defect List Length field.) The different command forms give the
initiator control over the contents of the Grown Defect List. Table 5-13 describes the
contents of the Grown Defect List after FORMAT UNIT command execution.
different combinations of the Format Data bit, Complete List bit, and the information
in the Defect List Length field. (Refer to FORMAT UNIT Defect Header List for a
description of the Defect List Length field.) The different command forms give the
initiator control over the contents of the Grown Defect List. Table 5-13 describes the
contents of the Grown Defect List after FORMAT UNIT command execution.
Table 5-13
FORMAT UNIT Command Supported Options
<:
# %!#
'+!
The FORMAT UNIT Parameter List (Table 5-14) consists of a Defect List Header
(Table 5-15) followed by one or more Defect Descriptors. Descriptors are either four
bytes or eight bytes in length.
(Table 5-15) followed by one or more Defect Descriptors. Descriptors are either four
bytes or eight bytes in length.
Table 5-14
FORMAT UNIT Parameter List-Data Format
&9"
9(
"?)
*(
0
+(+?+="?)*(?&!
+99, -)*+
0
0
N/A
All sectors found to be bad, but not listed in the Primary Defect
List or Grown Defect List, are added to the Grown Defect List.
List or Grown Defect List, are added to the Grown Defect List.
1
0
0
Same as above.
1
1
0
The existing Grown Defect List is discarded. A new Grown De-
fect List is generated, containing All sectors found to be bad, but
not listed in the Primary Defect List.
fect List is generated, containing All sectors found to be bad, but
not listed in the Primary Defect List.
1
0
>0
The Grown Defect List contains:
Original Grown Defect List
All sectors found to be bad, but not listed in the Primary Defect
List.
A list of sectors supplied by the initiator. These sectors are
passed in defect descriptors in the data-out buffer transfer that
occurs as part of the FORMAT UNIT command.
Original Grown Defect List
All sectors found to be bad, but not listed in the Primary Defect
List.
A list of sectors supplied by the initiator. These sectors are
passed in defect descriptors in the data-out buffer transfer that
occurs as part of the FORMAT UNIT command.
1
1
>0
Same as the case above, except that the current Grown Defect
List is discarded before formatting begins.
List is discarded before formatting begins.
*
5
>
'
%
$
0 - 3
Defect List Header
Initialization Pattern Descriptor (if any)
Defect Descriptors (if any)