Sony PEG-N770C/E User Manual
C
L
IE
O
p
e
ra
ti
n
g
In
s
tru
c
tio
n
s
Using your CLIÉ handheld
82
Conducting a HotSync
®
operation via a network
When you use the Network HotSync
®
application, you can take advantage of the LAN and WAN connectivity
available in many office environments. The Network HotSync
®
application enables you to perform a
HotSync
®
operation by dialing in to a network or by using a cradle that is connected to any computer on
your LAN or WAN (provided that the computer connected to the cradle also has the Network HotSync
®
application installed, your computer is on, and the HotSync
®
Manager is running).
Connecting to your company's dial-in server
The Network HotSync
®
application requires the following:
Your computer has TCP/IP support installed.
Both your company’s network system and its remote access server support TCP/IP.
You have a remote access account.
Everything you need to connect to your company’s dial-in server (network modem) is included in the
Palm™ Desktop for CLIÉ software and your CLIÉ handheld. You need to activate certain features,
however, on both the Palm™ Desktop for CLIÉ software and your CLIÉ handheld.
Palm™ Desktop for CLIÉ software and your CLIÉ handheld. You need to activate certain features,
however, on both the Palm™ Desktop for CLIÉ software and your CLIÉ handheld.
Preparing your computer
To prepare your computer, proceed as follows:
1
Click the HotSync
®
icon in the Windows
®
system tray and then select Network from the Shortcut
menu.
2
Click the HotSync
®
icon in the Windows
®
system tray again and then select Setup from the Shortcut
menu.
The Setup dialog box is displayed.
The Setup dialog box is displayed.
3
Click the Network tab and make sure your user name has a check mark selected next to it. If the check
mark is not there, select the check box next to your user name.
mark is not there, select the check box next to your user name.
4
Click OK.