Sony LIB-81 User Manual
14
Chapter 2 Installation
2
Remove the transport screw (turn counterclockwise) from the Shipping
position (upper hole) at the rear of the library, and then set it in the
Operation position (lower hole) with a screw driver or coin.
position (upper hole) at the rear of the library, and then set it in the
Operation position (lower hole) with a screw driver or coin.
Checking the Package Contents
After opening the package, make sure all of the following items are present.
Contact your dealer if anything is missing.
Contact your dealer if anything is missing.
• LIB-81 AIT Library (1)
• Power cable (1)
• SCSI terminator (1)
• Quick Start Guide (1)
• Air Filter (ACY-FL81) (4)
• Bar code labels (1 sheet; only supplied with models equipped with a bar code
• Power cable (1)
• SCSI terminator (1)
• Quick Start Guide (1)
• Air Filter (ACY-FL81) (4)
• Bar code labels (1 sheet; only supplied with models equipped with a bar code
reader)
• Safety Notice (1)
Note
In addition to the above, other documentation, cables, and cleaning cartridges
may also be included.
may also be included.
Preparing the Host Computer
To prepare the host computer before installing the AIT library:
1
Make sure that a SCSI host adapter card is installed in the host computer.
2
Install the application software supporting the library on the host computer.
For guidance on application software that can be used with the AIT library
and supported operating systems, contact your dealer.
and supported operating systems, contact your dealer.
Transport screw
Operation position