Sony LIB-81 User Manual

23

Chapter 2  Installation

Set the month, day, and year.

1 When the month digits flash, use the V and v buttons to set the month, 

then press the [ENTER] button.

2 When the day digits flash, use the V and v buttons to set the day, then 

press the [ENTER] button.

3 When the year digits flash, use the V and v buttons to set the year then 

press the [ENTER] button.

Set the hour, minute, and second.

1 When the hour digits flash, use the V and v buttons to set the hour, then 

press the [ENTER] button.

2 When the minute digits flash, use the V and v buttons to set the minute, 

then press the [ENTER] button.

3 When the second digits flash, use the V and v buttons to set the second 

then press the [ENTER] button.

When the country flashes, use the V and v buttons to set the country, then 
press the [ENTER] button.

When “[ENTER] to activate” 
appears, press the [ENTER] button.

The date and time and the country 
are now set. The display returns to 
the menu.

Press the [CANCEL] button twice to return to the status display.

Use the SCSI Menu of the control panel to set the SCSI IDs and SCSI parity of 
the AIT library and AIT drives.

About SCSI ID
For each SCSI bus, a unique SCSI ID must be set for the AIT library and AIT 
drives. The default factory settings of SCSI IDs are as follows:
• Library:

0

• AIT  Drive:

1

Library

SCSI Connector 1

Library 
Controller

AIT Drive

SCSI Connector 2