Sony LIB-81 User Manual

41

Chapter 3  Basic Usage

When the AIT drive needs cleaning or a specific part needs to be replaced upon 
reaching its periodic replacement time, a warning message is displayed on the 
LCD panel.

The warning messages and their solutions are as follows:
“Cleaning Request”:

The AIT drive needs to be cleaned.
Clean the AIT drive. For information about how to clean the drive, 
refer to “Cleaning the AIT Drive” (page 63) in Chapter 5, “Operating 
the AIT Drive”.

“Threshold Condition Met”:

The specific part has operated more than the specified number of 
times.
Since the specific part has reached the periodic exchange time, 
contact the service and support center.

“Drive Information”:

An error occurred in the AIT drive. A two-digit error code appears 
after the warning message. For details about these codes, see “Other 
Messages” (page 100).

“FanX trouble”:

An anomaly has occurred at fan X (where X is the fan number).
Contact your nearest Sony Service Support Center.

“Cleaning Tape at EOM”:

The spent cleaning cartridge is set. Replace the spent cleaning 
cartridge with a new one.

“Clean failure”:

Cleaning failed. Repeat the cleaning procedure.

When an error occurs in the AIT library, an error code appears on the LCD 
panel.
For information about error codes, refer to the “Error Code List” (page 98) in 
the “Appendix” chapter.