Sony LIB-81 User Manual
50
Chapter 4 Operating the AIT Library
Chapter
Operating the
AIT Library
Overview
This chapter explains how to take out, change and move the cartridges, how to
view information about the AIT library, cartridges and errors, and how to test
the hardware.
view information about the AIT library, cartridges and errors, and how to test
the hardware.
Using the Cartridges
This section explains steps to take out, change and move the cartridges.
For information about how to prepare and load the cartridges, refer to “Setting
the Cartridges” (page 25) in Chapter 2, “Installation”.
For information about how to prepare and load the cartridges, refer to “Setting
the Cartridges” (page 25) in Chapter 2, “Installation”.
Taking Out the Cartridges
To take out a cartridge set in the AIT library or AIT drives specify the slot with
the element address.
For information about element addresses, refer to “Assigned Element
Addresses” (page 48) in Chapter 3, “Basic Usage”.
the element address.
For information about element addresses, refer to “Assigned Element
Addresses” (page 48) in Chapter 3, “Basic Usage”.
To take a cartridge out of the AIT library:
1
At the status display, press the [MENU] button for two seconds.
2
Use the V and v buttons to select “2.Eject/Insert”, then press the [ENTER]
button.
button.
“Eject/Insert” appears.
3
Select “1.Eject From Library”, then
press the [ENTER] button.
press the [ENTER] button.
Eject/Insert 12:34
1.Eject From Library
2.Eject From Drive
3.Insert Into Library
1.Eject From Library
2.Eject From Drive
3.Insert Into Library