Sony LIB-81 User Manual

53

Chapter 4  Operating the AIT Library

Two or more inserted 
cartridges
The element address of the front 
slot appears on the first line. The 
element address of the next slot 
appears on the second line.
1 Eject the cartridge and press the 

[ENTER] button.

2 The slot moves to the next. Eject 

the cartridge in the same manner 
and press the [ENTER] button.
When you press the [ENTER] 
button, the slot moves to the next.

3 Repeat until all the cartridges are 

ejected, and then press the 
[CANCEL] button.

Only one inserted cartridge
The element address of the front 
slot appears on the first line. 
(Nothing appears on the second 
line.)
1 Eject the cartridge and press the 

[CANCEL] button.

Do not put your fingers in the slot 
when it is moving, as this could 
result in injuries.

When “[ENTER] to activate” appears, press the [ENTER] button.

If you selected “1. Single Mode” in 
step 4, the display on the right 
appears.

If you selected “2. Multiple Mode” 
in step 4, the display on the right 
appears.

The shutter closes and the 
initialization is performed.

Keep your fingers clear of the 
shutter when it closes.

When the initialization ends, press the [CANCEL] button three times to 
return to the status display.

When replacing a cartridge, specify the slot using the element address. For 
information about element addresses, refer to “Assigned Element Addresses” 
(page 48) in Chapter 3, “Basic Usage”.