Sony SDZ-S130 User Manual
Chapter 3 Operation
34
4
Apply gentle pressure to the back of the cartridge until the unit takes the
cartridge and loads it.
cartridge and loads it.
Caution
Do not apply force to the cartridge after the unit starts loading it. Otherwise,
the cartridge may rush out of the unit when it is ejected.
the cartridge may rush out of the unit when it is ejected.
5
Close the front door to minimize any contamination from airborne
particles.
particles.
When the cartridge is loaded, the TAPE MOTION indicator lights green or
yellow.
yellow.
Notes
• The host software controls the reading and writing of tapes.
• For details about the status of the unit as shown by the indicators on the front
• For details about the status of the unit as shown by the indicators on the front
of the unit, see chapter 1.
Removing a Cartridge
When the cartridge is automatically ejected by your
software
software
1
Press the DOOR button to unlock and open the front door.
2
Remove the cartridge from the unit and close the door.
When you eject the cartridge manually
1
Press the DOOR button to unlock and open the front door.
2
Press the Eject button. The cartridge is ejected automatically.
3
Remove the cartridge from the unit and close the door.
Caution
Do not push the eject button when the TAPE MOTION indicator is flashing.
This may destroy data on the tape.
This may destroy data on the tape.
Eject button