Epson CMD-2260 User Manual

If “CD Audio” is not available in your Windows Accessories Group “Media Player”, you must complete the following steps to
install it:

1)

Go to “Control Panel” and then to “Drivers”;

2)

If [MCI] CD Audio is not listed go to add;

3)

Chose [MCI] CD Audio and install the file;

4)

If [MCI] CD Audio was listed choose setup and your CD-ROM should be detected;

5)

Exit Windows and then restart Windows;

6)

Go to Media Player and choose CD Audio under device.

1)

If you are using OS/2 Warp, you must choose the driver “Unlisted IDE CD-ROM”;

2)

If you are using OS/2 2.x, you must obtain the new drivers from Epson or IBM.

You must obtain the IDE compatible files from your Linux distributor or from Epson

If you are connecting the Epson CD-ROM to the secondary port of the controller card, the drive must be configured to be a
master drive. When you are using the master drive configuration, it is suggested that you also use IRQ 15.

ATA/IDE Owner’s Manual

15