DELL ML6000 User Manual

12

Dell PowerVault ML6000 Getting Started Guide

Connecting Parallel SCSI Cables

Perform this step if your library contains parallel SCSI tape drives. 

There are two recommended ways to cable SCSI tape drives: one tape drive per 
SCSI bus or two tape drives per SCSI bus.

 

NOTE: 

To avoid possible performance issues, do not connect more than two tape 

drives per SCSI bus.

To connect one tape drive per SCSI bus:

1 Use a SCSI cable to connect the bottom port of the tape drive to your host 

system.

2 Attach a SCSI terminator to terminate the top port of the tape drive.

To connect two tape drives per SCSI bus:

1 Connect one end of a SCSI cable to the top SCSI port of the bottom tape 

drive. 

2 Connect the other end of the cable to the bottom SCSI port of the tape 

drive above. 

3 Use another SCSI cable to connect the bottom tape drive of the SCSI bus 

to your host system.

4 Use a SCSI terminator to terminate the top tape drive of the SCSI bus.

APCC.book  Page 12  Tuesday, March 9, 2010  4:25 PM