DELL DL2100 User Manual
Installing System Components
145
Figure 3-34.
System Board Removal
Installing the System Board
1 Unpack the new system board and remove the label placard that is inserted
in the memory module socket.
2 Remove the labels from the placard and affix them to the information tag
3 Transfer the processors and heat sinks to the new system board. See
4 Remove the memory modules and transfer them to the same locations on
5 Install the new system board:
a
Angle the system board as you lower it into the chassis and set the
board flat inside the chassis.
board flat inside the chassis.
b
Maneuver the system board so that all of the retention hooks on the
chassis are inserted into the retention slots on the system board.
chassis are inserted into the retention slots on the system board.
1
system-board tray riser release pin
2
system board
2
1