Hitachi HUS154530VLF400 User Manual
Hitachi Ultrastar 15K450 (FC-AL) Hard Disk Drive Specification
88
• 1 0
• 1 1 Worst
The Preference field is ignored.
The Document Identifier field specifies which Profile or Standard is associated with each Capability Entry. Valid Document
Identifiers are listed in Table 66. If the Vendor Unique Flag is set to a value other than 00h, then the Document Identifier spec-
ifies a vendor unique capability.
Identifiers are listed in Table 66. If the Vendor Unique Flag is set to a value other than 00h, then the Document Identifier spec-
ifies a vendor unique capability.
Table 66: Document Identifiers
The Low Revision field defines the lowest revision of the specified document supported. The field represents a decimal revi-
sion number between 0.0 and 25.5.
sion number between 0.0 and 25.5.
The High Revision field defines the highest revision of the specified document supported. The field represents a decimal revi-
sion number between 0.0 and 25.5.
sion number between 0.0 and 25.5.
The Extension Length field is a two byte unsigned integer that specifies the number of additional bytes present in the Capa-
bility Entry. This number includes itself, the preceding reserved field, and the length of Extension Field.
bility Entry. This number includes itself, the preceding reserved field, and the length of Extension Field.
Profile or standard name
Identifier
Supported
Reserved
00h
N
FC-LE
01h
N
FC-SB
02h
N
IPI-3
03h
N
SCSI-FCP
04h
Y
FC-FP
05h
N
Reserved
06h-0Fh
N
FC-GS
10h
N
FC-FG
11h
N
FC-SW
12h
N
FC-AL
13h
Y
Reserved
14h-1Fh
N
IBM/HP/Ancor FC-PH 4.2 Deviations
20h
N
FCSI Mixed Mode SCSI Profile
21h
N
FCSI Class 2 SCSI Profile
22h
N
FCSI IP Profile
23h
N
FCSI IP Class 2 Profile
24h
N
FC-PLDA – Private Loop Direct Attach
25h
Y
FLA Fabric Loop Attach Profile
26h
Y
FCA IP Profile
27h
N
Reserved
28h-FFh
N