Fujitsu MHY2120BH User Manual
Operations
6-12
C141-E262
(3) Slumber mode
In this mode, the (deep) Power Save mode is set for the interface circuit.
The device switches to Slumber mode when the following occurs:
•
The device receives the PMREQ_P signal from the host and responds with
the PMACK signal.
•
The device sends the PMREQ_S signal and the host responds with PMACK
signal.
The device cannot switch to Slumber mode if the following condition is satisfied:
•
The device responds with the PMNAK signal because it is not waiting for
commands.
The device returns to Active mode from Slumber mode when the following
condition is satisfied:
condition is satisfied:
•
The device receives the COMRESET or ComWake signal from the host.