Yamaha CRW2100SX User Manual
Setup Flowchart
These flowcharts show the procedure for setting up the CRW2100SX drive. For
easy cross-referencing, the relevant pages in this manual are also given.
easy cross-referencing, the relevant pages in this manual are also given.
Windows Users
9
STEP
2
Check that the SCSI card is
recognized correctly (P.22)
recognized correctly (P.22)
STEP
4
Check that the CRW2100SX
drive is recognized correctly
(P.22)
drive is recognized correctly
(P.22)
STEP
1
Do you have a SCSI card?
STEP
1-1
STEP
1-2
STEP
3
STEP
5
STEP
6
YES
NO
Set up the CRW2100SX drive
Install the CD writing software
Purchase a SCSI card
Install the SCSI card
Recommended models:
Adaptec AHA-2940-series (PCI)
Adaptec AHA-2940-series (PCI)
Read this manual and insert the
SCSI card into the appropriate
PCI slot on the computer.
SCSI card into the appropriate
PCI slot on the computer.
For details about how to install the
software, refer to the documentation that
came with it.
software, refer to the documentation that
came with it.
Start using the CRW2100SX
drive!
drive!
Use the drive to create audio CDs, to
back up data on your hard disk, or for
whatever purpose suits your needs.
back up data on your hard disk, or for
whatever purpose suits your needs.
1. Set the switches at the rear of the drive.
(P.12, 13)
2. Connect the SCSI and power cables,
then switch the drive on. (P.18-20)