Apple 13-0010--001 User Manual

you controller in that slot.

3.

Insert the gold covered “fingers” into the 

slot and GENTLY rock the controller card into a 

firmly seated position.

4. Adjust your ribbon cables so they pass easily 

out through the back of the computer through the 

vertical openings in the rear of the case.

5.

If you wish to install a second controller 

card, the same procedure outlined above would be 

used; except the “standard” slot number for 

second controllers is slot five. A third 

controller would normally go in slot four.

6.

Replace the lid, remembering to slide the 

front edge into the case first, then press down 

on the two rear corners until they pop into 

place.

7.

Your Elite product is now installed and the    

Apple II can be turned on. Your disk drive(s)  

can be placed in a convenient location, usually 

along side or on top of the computer.

See figures 1. and 1.2 for correct cable connec-

tions to the Elite and Disk If controller cards.