Quantum LTO-2 User Manual
![Quantum](https://files.manualsbrain.com/attachments/ca899287dff61d1f33a1c7bab7817a3b487b137c/common/fit/150/50/f93012c635c78a826a2112e2b27bef1217df419ecadb31ba968d3a8a7575/brand_logo.jpeg)
Chapter 2 Installation and Quick Start
Quick Start Guide
LTO-2 Half-Height Tape Drive User’s Guide
5
Desktop LTO-2
Half-Height Tape
Drive Quick Start
Half-Height Tape
Drive Quick Start
2
Use the following procedure to install desktop LTO-2 Half-Height Tape
Drive. Print this page and check each step as you complete it. If you need
more information about a step, turn to the section referenced in the step.
1
Unpack the contents of your drive package, and check for damaged items.
See
.
2
Review the drive’s default settings and change them if necessary:
• SCSI ID: 6
• SCSI ID: 6
3
Connect a SCSI interface cable to the drive.
See
4
Check the SCSI termination.
See
5
Connect a power cable to the drive.
See
6
• Turn on the computer
• Turn on the desktop tape drive
• Verify that the desktop tape drive is operating properly.
• Turn on the desktop tape drive
• Verify that the desktop tape drive is operating properly.
7
Register your tape drive.
See