Quantum LTO-2 User Manual

Chapter 6  UNIX Settings

Configuring for HP-UX 11.0

LTO-2 Half-Height Tape Drive User’s Guide

61

M TCAN_COMPRESS,
40, 5*60, 10*60, 10*60, 3*3600, 512, 256*512, 
tpsc_default_dens_count, tpsc_defalt_hwg_dens_names,
tpsc_default_alias_dens_names, {0}, 0, 0, 0, 0, (u_char*) 0},

After modifying the configuration file, recompile the kernel with the 
autoconfig

 command and reboot the system. If you are replacing an 

existing storage device with the same SCSI ID remove the device files 

prior to using the autoconfig command and rebooting the system.

Configuring for HP-UX 11.0

6

6

To find currently installed SCSI controllers and devices, use the 

command

. This command lists all the system devices and 

their device names.

6

Choose a SCSI address that does not conflict with any already attached 

SCSI devices on your SCSI controller. 

installation for the LTO-2 Half-Height Tape Drive. Attach the LTO-2 

Half-Height Tape Drive and apply power to the drive(s) and the host 

system. After the boot process completes and you log in as superuser, 

issue the command: 

You should see output similar to: 

Class  I  H/WPath   Driver S/WState  H/Wtype  Description
Tape   7  8/12.6.0  stape  Claimed   Device   CERTANCE ULTRIUM 2

From the root directory and as superuser, issue the command: 

Then issue the command: 

/sbin/mksf –d stape –H x/x.x.x –I y –c 1

–n –u /dev/rmt/zcnb