Radio Shack 26-762 Leaflet

Please read this user’s guide before

installing, setting up and using your new product

 www.radioshack.com

26-762 

27 MHz RF

Wireless Keyboard

& Optical Mouse Combo

user’s guide 

wireless keyboard   

wireless mouse 

charger / receiver

AC adapter 

CD (drivers)

2 AAA batteries (rechargeable NI-MH)

Installing the Batteries

You can power the mouse with two AAA 
batteries, and the keyboard with two AA 
batteries.

1 Remove the compartment cover from both 

the keyboard and mouse. 

2 Insert the AA batteries into the keyboard  

and the AAA batteries into the mouse. Be 
sure to match the polarity markings.

3 Replace the compartment covers.

Connect one end of the supplied adapter to 
the charger/receiver’s DC port and the other 
end to a standard AC outlet. Place the mouse 
in the charging stand. The red LED lights when 
the batteries are charging. The green LED lights 
when charging is complete.
When the batteries in the mouse get low, the red 
LED on the mouse fl ashes if the mouse is in use.
When the batteries in the keyboard get low, the 
battery indicator turns red.

DC port

CONNECT

Installing the Windows 98 Driver

Your mouse and keyboard work with Microsoft 
Windows 98/2000/Me/XP/NT.  Except for 
Windows 98, they should work well without 
installing the driver. If you are using Windows 
98, be sure to install the driver before 
connecting the keyboard and mouse. 

1 Exit all open Windows applications. 

2 Insert the supplied CD in your computer’s 

CD-ROM driver. Installation instructions 
will be displayed on the computer 
automatically. 

3  Follow the on-screen instructions. 

Setting the Channel

The keyboard and mouse offer 2 channels, CH1 
and CH2. The receiver automatically detects the 
mouse’s channel.  If interference is caused by 
the other computers, reset the channel. 

To reset the channel on the keyboard, slide 
CH1 / CH2 on the back of the keyboard. To 
reset the channel on the mouse, remove the 
battery compartment on the mouse, and use 
a pointed object to slide the switch inside the 
compartment to CH1 or CH2. Then replace the 
cover.

If you change the channel on the mouse, you 
will need to press CONNECT on the receiver 
and the mouse. 

If you change the channel on the keyboard, the 
channel will be automatically detected.

1 Connect the charger / receiver’s USB cable 

to your computer’s USB port. 

2 Press CONNECT on the receiver. The 

receiver’s indicator lights green.

3 Press the reset key at back of the mouse and 

CONNECT on the keyboard.

4 Press CONNECT on the keyboard again. The 

keyboard enters the connecting state again, 
and the indicator lights green.

5 Press the reset button on the back of the 

keyboard. The receiver indicator light turns 
off.

When you change the channel or replace the 
batteries, you will need to repeat steps 2 and 3.

Reset button

CH1 / CH2

Changing the ID Code

To avoid interference with other Windows 
desktop sets, you will need to change the ID 
code.

1 Use a pointed object to press the reset 

button on the back of the mouse and 
press CONNECT on the right top of 
keyboard to change the code. 

2 Press CONNECT on the receiver. 

3 Press the reset key on the back of the 

mouse.

CH1 / CH2

 

CONNECT