Alesis MultiMix 4 USB's GUITAR / LINE SWITCH User Manual

Page of 12
 
 
 CONNECTION DIAGRAM 
 
 
 
 
 
 
 
Notes: 
y
 
When recording a guitar or bass with an active pickup, set the MultiMix 4 USB's GUITAR / LINE SWITCH to "LINE."  If your 
instrument uses a passive pickup, connect it to 
LINE INPUT 1 and set the switch to "GTR."  (You may use a line-level mono 
source connected to 
LINE INPUT 2 at the same time.) 
y
 
To reduce electrical hum at high gain settings, keep the MultiMix 4 USB's power supply away from your guitar cable and the 
MultiMix 4 USB's
 channel inputs. 
 
 AUDIO SETUP 
 
The MultiMix 4 USB is a class-compliant device that can be used with any digital 
audio workstation or recording software that supports USB audio.  To enable your 
MultiMix 4 USB to send and receive audio to and from your computer, follow the 
instructions below for your computer's operating system: 
 
WINDOWS VISTA: 
1.
  Go to Start Menu   Control Panel   Sound.  (If you don’t see Sound, select 
Switch to Classic View, and the Sound Control Panel should become available.) 
2.
  Click the Playback tab and select USB Audio Codec* as the default device.  
3.
  Click the Recording tab and select USB Audio Codec* as the default device. 
4.
  Click Properties in the lower right-hand corner. 
5.
  In the new window, click the Advanced tab and select 2-channel, 16-bit, 44100 
Hz (CD Quality) as the default format. 
6.
  Uncheck both boxes under Exclusive Mode.  
7.
  Click OK to close the Properties window. 
8.
  Click OK to close the Sound control panel. 
 
WINDOWS XP: 
1.
  Go to Start Menu   Control Panel   Sounds and Audio Devices
2.
  Click the Audio tab. 
3.
  Under Sound Playback and Sound Recording, select USB Audio Codec* as the default device. 
4.
  Click OK. 
 
MAC: 
1.
  Go to Applications   Utilities   Audio MIDI Setup
2.
  In the Audio Devices tab under System Settings, select USB Audio Codec* as your Default Input and Default Output
3.
  Close the window. 
 
 
 
 
 
 
 
                           Mic 
 
 
 
 
 
 
                               Guitar 
 
 
 
 
                                   CD Player 
     
 
 
   
 
   Computer 
 
                            
 
 
 
 
 
 
          Headphones 
 
                              
 
                   Speakers 
 
 
 
     
  Power 
 
BOX CONTENTS 
y
 
MultiMix 4 USB 
y
 
USB cable 
y
 
Power adapter 
y
 
Quickstart Guide 
y
 
Safety Instructions & Warranty 
Information booklet 
Be sure your audio software 
program is set up to receive audio 
via the MultiMix 4 USB.  This can 
usually be done in your software’s 
"Preferences" or "Device Setup."  
Please consult your software 
manual for more information.
 
*  If you have other USB audio 
devices connected to your 
computer, which may have 
identical names, you may need to 
try selecting each one until the 
MultiMix 4 USB is recognized.