Xerox 144 User Manual

Xerox Nuvera

 100/120/144 EA Digital Production System - Customer Expectations Document

 

- 16 -

 

 7½ minutes 

If the environment does drift outside the specified range during 

the systems’ powered down state, some period of image 

degradation can be expected at startup. 

 8½ seconds (with one finisher and no 
inserter) 

Copy job sent to the top tray; platen scan, simplex job, 8.5 x 11 
LEF fed from tray 1 

9½ seconds. 

Printer should not cycle down as long as it receives an image 
to print within 5 seconds of completing the previous sheet. 

5 minutes 

 

 

Available via the Administration 
window. 

Vary by operating company / country; ask local analyst or 

sales representative to explain your meter operation. 

Automated reading of the billing meter is available, if Remote 
Services are enabled. 

Automatic, brief pauses for registration or 

xerographic process adjustments to 
maintain high image quality 

 

Switching between one-sided and two-
sided printing does cause some loss of 

productivity.  The extent of the loss is 

directly related to the frequency of the 

switch.   

When producing collated sets run 1 to N, the system already 
optimizes performance.  In other cases, adding a blank side to 

the job can minimize impact, but the sheet is billed.   

The consumable supplies listed below are engineered specifically for use in the Xerox Nuvera

 

100/120/144 EA Digital Production System and provide the highest and most consistent image quality, 
maximum machine productivity, and uptime. 
All yield estimates are based on the indicated 6% area coverage at standardized conditions using 8 ½” 
x 11” / A4 Xerox 20 lb. bond (75 gsm) stock.  Please note that actual yields vary greatly depending on 
area coverage, paper stock, and image quality control settings.  The current estimates are shown 
below.  

 

Consumables 

210,000 prints/bottle; 1 bottle per system (2

nd

 toner bottle is available as an option) 

15,000 staples per supply package, 

The package contains three 5000 staple refills and 3 drivers  

15,000 staples per supply package, 
The package contains three 5000 staple refills and 3 drivers 

Comes installed in machine. Filled with 1 - 5,000 staple refill, this cartridge typically lasts the life 

of machine. 

5,000 staples per refill, 3 refills per carton 

Required for initial 50-sheet stapler capacity order.  Filled with 1 - 5,000 staple refill, this 

cartridge typically lasts the life of machine. 

5,000 staples per refill, 3 refills per carton. 

 

2,000 staples per box; 16,000 per carton 
(8 Boxes per carton)