Sony SF10000 User Manual

The CD Settings tab allows you to specify settings for burning and extracting audio from CDs. 

Item  

Description 

Use strict Red Book specification for  Select this check box if you want to be notified prior to burning a disc-at-once CD if anything about 
DAO validation  

your CD project is against strict Red Book standards. 

These warnings are not critical, and in most cases you will not write an unreadable disc if you proceed. 
Clearing this check box will not suppress critical warnings that will result in an unreadable disc. 

Use SPTI Direct for CD burning 

Select this check box if you want to use SPTI (SCSI Pass-Through Interface) to communicate with your 
CD burning drive. 

Overwrite CD Text autodetection 

If the software incorrectly detects that your CD recorder is not able to write CD Text, select this check 

results 

box to turn on CD Text writing for your drive. 

Include Wide SCSI devices when 

Select this check box if you want to scan for wide SCSI CD drives when you attempt to extract data from 

searching for drives 

or burn CDs. 

When the check box is cleared, the application will not scan for wide SCSI devices, which can increase 
compatibility with some USB device drivers that incorrectly identify themselves as wide SCSI. 

Skip drive database; autodetect 

When the check box is cleared, an internal configuration file is used to determine your drive’s 

drive capabilities on startup 

capabilities. 

If you encounter problems burning CDs, select this check box, and your drive to determine its 
capabilities when the application starts. 

Automatically detect CD length 

Select this check box if you want to automatically detect the length of your blank CDs when you insert 
them in your drive. 

When this check box is cleared, the Default CD length (minutes) setting is used, and you can click the 
CD Time Remaining box in the status bar to update the available time on a CD. 

Default time between CD tracks 

Type a value in the edit box to specify the length of time that is inserted between disc-at-once CD 

(seconds) 

tracks. 

Default CD length (minutes) 

Type the default length for CD media. This length is used if the software has not yet scanned your CD 
drive or if no CD is in your drive. 

This length is used to calculate the amount of time remaining on the disc that is displayed in the status 
bar. 

CUSTOMIZING SOUND FORGE PRO SOFTWARE 

|