Sony SAC7000 User Manual

Select the Automation Settings button 

 in the track header. 

Click the Automation Settings button 

 and choose a command from the menu to choose the automation mode. 

Mode 

Track Icon 

Description 

Off 

Automated parameters are ignored during playback. 

When you switch to Off mode, the control setting from the cursor position is 
used as a static setting, and the envelope/keyframe is dimmed to indicate that 
it is unavailable. 

Read 

The envelope/keyframe value is applied during playback, and the control 
reflects the envelope/keyframe settings at the cursor position. 

Adjustments to the control are not recorded. 

Automation Write (Touch) 

The envelope/keyframe value is applied during playback, and the control 
follows the envelope/keyframe settings during playback and when you 
position the cursor. 

Envelope points or keyframes are created only while a control is being 
adjusted. When you stop adjusting the control, automation recording stops 
and the existing envelope points/keyframes are unaffected. 

Automation Write (Latch) 

The envelope/keyframe value is applied during playback, and the control 
follows the envelope/keyframe settings during playback and when you 
position the cursor. 

Envelope points or keyframes are created when you change a control setting, 
and recording continues until you stop playback. When you stop adjusting the 
control, the control's last setting overwrites the existing envelope points/ 
keyframes. 

USING AUTOMATION 

|