Sony SF-10000 User Manual

Item 

Description 

Sync graphs 

If you are analyzing a multichannel file, select the Sync graphs check box to 
synchronize the displays so you can view the same region of the FFT in all channels. 

Logarithmic graphing 

Select the Logarithmic graphing check box to display the X-axis in logarithmic mode 
rather than linear mode. In logarithmic mode, more of the graph is devoted to lower 
frequencies. 

Logarithmic graphing affects the display only when Normal Display is 

Freq. Min. (Frequency 

Determines the lowest frequency displayed in the graphs. 

minimum) 

Max. (Frequency maximum) 

Determines the highest frequency displayed in the graphs. 

Ceiling 

Determines the highest amplitude displayed in the graphs. 

Floor 

Determines the lowest amplitude displayed in the graphs. 

Hold peaks during monitoring  Select this check box to indicate the highest value of each frequency on the spectrum 

graph with a small horizontal line. The length of time (in seconds) that the peak is held 
is determined by the value entered in the edit box. 

Maintain last monitored view 

Select this check box if you want to maintain the state of the Spectrum Graph when 
you stop playback. Clearing this check box results in the graph resetting to the cursor 
position when playback stops. 

After you configure the controls in the Spectrum Settings dialog, you can save the settings as a custom preset by clicking Save As and 
entering a name for the new preset. Click OK to save the new preset. 

|

 CHAPTER 19