Lenmar Enterprises PPUCLIP User Manual

BATTERY

1

2

3

1
2

3

5

4

Lenmar product is warranted to be free of defective parts and workmanship 
for stated period from the original date of purchase. Warranties are non- 
transferable. The warranty excludes damage resulting from accident, misuse, 
modification, delay or loss of use, damage to equipment or by normal wear 
and tear.

ALL WARRANTY REQUESTS MUST BE SUBMITTED AT: 
www.lenmar.com/warranty

INCLUDE A COPY OF ORIGINAL PROOF OF PURCHASE WITH RETURNED 
PRODUCT OR THE CLAIM WILL BE DENIED.

Copy of Proof of Purchase from an authorized Lenmar Dealer must include the 
following:
- The company where the product was purchased
- The date of purchase
- The model number of the product purchased
- Send back the product freight prepaid (we recommend insuring the package 
as Lenmar will not be responsible for shipments lost or damaged in transit).

Include $7.50 payable to Lenmar Battery Solutions for processing fee for ship 
to address in the Continental United States. 
Include $12.50 for ship to address in Hawaii, Alaska or Canada.

Send to:

Lenmar Battery Solutions

Attn: Return Department

4035 Via Pescador

Camarillo, CA 93012-5050

Use preprinted Lenmar shipping label or clearly print your RA Number on the 
outside of the shipping carton.

For additional questions, comments or to explore other Lenmar battery 
solutions, visit our web site at: www.lenmar.com or call 800/424-2703 from 
9AM – 5PM PST.

• The product provides current and voltage surge protection as well as short-
   circuit protection and is suitable for charging 3.6 & 3.7V lithium batteries
• Do not leave the charger in wet conditions or under high temperatures
• It is normal for the charger to become warm when in use;  this will not 
   damage the battery
• Do not charge non-rechargeable batteries

Battery Type: Rechargeable 3.6-3.7V Li-Ion batteries
Power: DC 5V USB interface Model A
Voltage: DC5.0V     0.25V for input and DC4.2     0.005V for output
Charging Current: MAX 500mA
Working Environment: Temperature 0-45C, Humidity 20-60%
Size: 47mm x 26.5mm x 27mm
Weight: Approx. 11g

Flip up the USB connector on the PPUCLIP.

Press the back of the top cover to open the PPUCLIP.

Slide the battery towards the PPUCLIP’s contacts, adjusting them so 

that one contact touches the positive (+) terminal of the battery and 

the other touches the negative (-) terminal. There is no need to worry 

about positive and negative polarity connections - the polarity is auto 

sensing and adjusts accordingly. 

When the battery is installed correctly and making proper contact the 

green LED will turn on.

Insert the USB end of the PPUCLIP into any USB port. Both the red and 

green LEDs will turn on indicating the battery is charging. 

The red LED will gradually dim as the battery reaches a full 

charge. When the battery reaches a full charge, the red LED will 

turn off and the green LED remains on, indicating a full charge. 

Model: PPUCLIP

PowerPort™ Clip USB Battery Charger

PLEASE READ THIS INFORMATION THOROUGHLY BEFORE USING THIS 

PRODUCT. IT CONTAINS IMPORTANT OPERATING INSTRUCTIONS FOR 

YOUR UNIT.

6

310-669-07-1110 r2 y1