Nortel Networks 6400 User Manual
33
Passport 4400 and 6400 Quick Start Guide 6.0S1
Configuring the RSI - RSA connection
Voice networking requires the provisioning of the Remote Server Interface
(RSI) on the 4400 and the Remote Server Agent (RSA) on the 6400. Together
they form the connection that allows the 4400 access to the voice networking
call server (VNCS) on the 6400. Both digital and analogue voice networking
require an RSI - RSA connection.
(RSI) on the 4400 and the Remote Server Agent (RSA) on the 6400. Together
they form the connection that allows the 4400 access to the voice networking
call server (VNCS) on the 6400. Both digital and analogue voice networking
require an RSI - RSA connection.
Note the following when configuring the connection:
•
A typical network has multiple RSAs for load sharing and backup
purposes. The following example also uses this approach.
purposes. The following example also uses this approach.
•
You can locate the RSA on any 6400 in the network. However, the RSA
and VNCS must be on the same shelf.
and VNCS must be on the same shelf.
•
The RSA should be configured on its own function processor.
Figure 4 shows an example of an RSI - RSA configuration. The commands
that follow use the variables from this example. When configuring your
network, replace the example variables with variables unique to your network
setup.
that follow use the variables from this example. When configuring your
network, replace the example variables with variables unique to your network
setup.