Nortel Networks NN10029-111 User Manual
35
Copyright © 2003, Nortel Networks
MCP SIP Application Module Basics
Nortel Networks Confidential
Fault management
The Management Module manages the faults for the SIP Application
Module. For additional information on the Management Module, refer to
the MCP Management Module Basics and the MCP System
Management Console Basics documents.
Module. For additional information on the Management Module, refer to
the MCP Management Module Basics and the MCP System
Management Console Basics documents.
How this chapter is organized
This chapter is organized as follows:
•
Alarm clearing procedures
•
Recovery procedures
Alarm clearing procedures
Procedure 1 Clearing the SLE701 (SLEE Health Monitor) alarm
at the alarm browser
1
The SIP Application Module raises this warning alarm under one
of two conditions:
of two conditions:
•
The number of application contexts (AC) available for use
are inadequate for the level of traffic (in which case the
administrator needs to back off the traffic or call the next level
of support).
are inadequate for the level of traffic (in which case the
administrator needs to back off the traffic or call the next level
of support).
The SIP Application Module raises this alarm when AC pool
use reaches or exceeds 80%. The alarm clears when use
drops below 80%.
use reaches or exceeds 80%. The alarm clears when use
drops below 80%.
•
There is an error condition that is causing ACs to be
consumed at a higher than normal rate. This could be due to
a myriad of things; for example, the system might be
consuming RetrieveSubscriber ACs at a high rate because
the database is overloaded.
consumed at a higher than normal rate. This could be due to
a myriad of things; for example, the system might be
consuming RetrieveSubscriber ACs at a high rate because
the database is overloaded.
Severity is MAJOR. The SLEE is a service processing
environment. An AC is a unit of work within that processing
environment. An AC is a unit of work within that processing